Updated Fortinet Questions Ensure Thorough NSE7_EFW-7.2 Exam Preparation

A good learning platform should not only have abundant learning resources, but the most intrinsic things are very important, and the most intuitive things to users are also indispensable. The NSE7_EFW-7.2 test material is professional editorial team, each test product layout and content of proofreading are conducted by experienced professionals who have many years of rich teaching experiences, so by the editor of fine typesetting and strict check, the latest NSE7_EFW-7.2 exam torrent is presented to each user's page is refreshing, but also ensures the accuracy of all kinds of learning materials is extremely high. Imagine, if you're using a NSE7_EFW-7.2 practice materials, always appear this or that grammar, spelling errors, such as this will not only greatly affect your mood, but also restricted your learning efficiency. Therefore, good typesetting is essential for a product, especially education products, and the NSE7_EFW-7.2 test material can avoid these risks very well.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

Topic	Details
Topic 1	Central management: The topic of Central management covers implementing central management.
Topic 2	Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.
Topic 3	Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
Topic 4	VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.
Topic 5	System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.

>> Authorized NSE7_EFW-7.2 Exam Dumps <<

Valid Braindumps NSE7_EFW-7.2 Book | NSE7_EFW-7.2 Test Torrent

Lead1Pass has hired a team of experts who keeps an eye on the Fortinet NSE 7 - Enterprise Firewall 7.2 real exam content and updates our NSE7_EFW-7.2 study material according to new changes on daily basis. Moreover, you will receive free Fortinet NSE 7 - Enterprise Firewall 7.2 exam questions updates if there are any updates in the content of the Fortinet NSE 7 - Enterprise Firewall 7.2 test. These updates will be given within up to 1 year of your purchase. The 24/7 support system has been made for your assistance to solve your technical problems while using our product. Don't wait anymore. Buy real Fortinet NSE 7 - Enterprise Firewall 7.2 questions and start preparation for the NSE7_EFW-7.2 test today!

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q36-Q41):

NEW QUESTION # 36
Refer to the exhibit, which shows an SSL certification inspection configuration.
SSL certification inspection configuration

While testing, the administrator updated the ssl-ssh-profile configuration with the command set sni-server-cert-check strict.
The administrator found that the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.
With respect to the set sni-server-cert-check strict command, which action does FortiGate take?

A. FortiGate uses the first entry listed in the SAN field in the server certificate.
B. FortiGate uses the SNI from the user's web browser.
C. FortiGate uses the CN information from the Subject field in the server certificate.
D. FortiGate closes the connection because this represents an invalid SSL/TLS header.

Answer: D

NEW QUESTION # 37
Refer to the exhibit, which shows two configured FortiGate devices and peering over FGSP.

The main link directly connects the two FortiGate devices and is configured using the set session-syn-dev <interface> command.
What is the primary reason to configure the main link?

A. To load balance both sessions and configuration synchronization between layer 2 and 3
B. To have both sessions and configuration synchronization in layer 3
C. To have both sessions and configuration synchronization in layer 2
D. To have only configuration synchronization in layer 3

Answer: B

Explanation:
The primary purpose of configuring a main link between the devices is to synchronize session information so that if one unit fails, the other can continue processing traffic without dropping active sessions.
A:To have both sessions and configuration synchronization in layer 2.This is incorrect because FGSP is used for session synchronization, not configuration synchronization.
B:To load balance both sessions and configuration synchronization between layer 2 and 3.FGSP does not perform load balancing and is not used for configuration synchronization.
C:To have only configuration synchronization in layer 3.The main link is not used solely for configuration synchronization.
D:To have both sessions and configuration synchronization in layer 3.The main link in an FGSP setup is indeed used to synchronize session information across the devices, and it operates at layer 3 since it uses IP addresses to establish the peering.

NEW QUESTION # 38
Refer to the exhibit, which contains information about an IPsec VPN tunnel.

What two conclusions can you draw from the command output? (Choose two.)

A. The IKE version is 2.
B. Forward error correction in phase 2 is set to enable.
C. Both IPsec SAs are loaded on the kernel.
D. Dead peer detection is set to enable.

Answer: A,C

Explanation:
From the command output shown in the exhibit:
B). The IKE version is 2: This can be deduced from the presence of 'ver=2' in the output, which indicates that IKEv2 is being used.
C). Both IPsec SAs are loaded on the kernel: This is indicated by the line 'npu flags=0x0/0', suggesting that no offload to NPU is occurring, and hence, both Security Associations are loaded onto the kernel for processing.
Fortinet documentation specifies that the version of IKE (Internet Key Exchange) used and the loading of IPsec Security Associations can be verified through the diagnostic commands related to VPN tunnels.

NEW QUESTION # 39
Refer to the exhibit, which shows a network diagram.

Which IPsec phase 2 configuration should you impalement so that only one remote site is connected at any time?

A. Set route-overlap to allow.
B. Set single-source to enable
C. Set route-overlap to either use-new or use-old
D. Set net-device to enable

Answer: B

Explanation:
The "single-source" option ensures that only one remote site is connected at any time, which aligns with the requirement in the question. This option prevents multiple VPN tunnels from being established between the same source and destination networks, and allows only the most recent tunnel to be active. This can be useful for scenarios where multiple remote sites have the same IP address range, as shown in the exhibit. Reference := Fortinet Enterprise Firewall Study Guide for FortiOS 7.2, page 142.

NEW QUESTION # 40
Refer to the exhibit, which shows a routing table.

What two options can you configure in OSPF to block the advertisement of the 10.1.10.0 prefix? (Choose two.)

A. Configure a distribute-list-out
B. Disable Redistribute Connected
C. Remove the 16.1.10.C prefix from the OSPF network
D. Configure a route-map out

Answer: A,D

Explanation:
To block the advertisement of the 10.1.10.0 prefix in OSPF, you can configure a distribute-list-out or a route- map out. A distribute-list-out is used to filter outgoing routing updates from being advertised to OSPF neighbors1. A route-map out can also be used for filtering and is applied to outbound routing updates2. References := Technical Tip: Inbound route filtering in OSPF usi ... - Fortinet Community, OSPF | FortiGate / FortiOS 7.2.2 - Fortinet Documentation

NEW QUESTION # 41
......

The Fortinet NSE7_EFW-7.2 desktop practice exam software is customizable and suits the learning needs of candidates. A free demo of the Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) desktop software is available for sampling purposes. You can change NSE7_EFW-7.2 Practice Exam's conditions such as duration and the number of questions. This simulator creates a Fortinet NSE7_EFW-7.2 real exam environment that helps you to get familiar with the original test.

Valid Braindumps NSE7_EFW-7.2 Book: https://www.lead1pass.com/Fortinet/NSE7_EFW-7.2-practice-exam-dumps.html